Welcome To Henan Steel Guang International Trade Co., Ltd.
Square Or Rectangular Tube
Similar products
  • EN10225

    EN10225 Weldable Structural Steels for Fixed Offshore Structures.Technical Delivery ConditionsBS EN 10225 specifies requirements for weldable structural steels to be used in the fabrication of fixed o...

  • ASTM A516 / ASME SA516

    ASTM A516/A516M Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower Temperature Service.ASTM A516/A516M specification covers carbon steel plates intended primarily for servi...

  • Angle Bar

    Angle, the steel strip is perpendicular to each other on both sides into the corner. There are equilateral angle steel and unequal edge angle steel. Widely used in a variety of architectural and engin...

Square Or Rectangular Tube

A Hollow Structural Section, or HSS, is a type of metal with a hollow tubular section. These sections can be circular (CHS), square (SHS) or rectangular (RHS). Hollow Structural Sections, especially RHS steel is commonly used in welded steel frames while SHS and CHS are more often used in columns. Hollow Steel Sections are also commonly used as beams.

The flat square surfaces of RHS has the ability to ease construction, and they are sometimes preferred for architectural aesthetics in exposed structures, but circular Hollow Structural Sections are becoming more popular in exposed structures for the same reasons.

Our company provides a square tube main brands, ASTM A500, ASTM A36, ASTM A572GR50, the allowable deviation of square pipe wall thickness, when not more than plus or minus 10% of the nominal wall thickness of the wall thickness is less than 10mm, when the wall thickness is greater than 10mm plus or minus 8% of the wall thickness, bending angle and weld zone wall thick except.

The usual delivery length of the square moment tube is 4000mm-12000mm, with the majority of 6000mm and 12000mm. The square tube is allowed to deliver short and non - scale products that are not less than 2000mm, and can also be delivered in the form of an interface tube, but the buyer should remove the interface tube when it is used. The weight of short and non - scale products does not exceed 5% of the total deliveries, and the square moment pipe with theoretical weight greater than 20kg/m should not exceed 10% of the total delivery.


Q235,SS400 Square Steel Pipe,Weld Square Steel Pipe,Galvanized Square Steel Pipe

Material type

hot rolled weld square steel pipe

Out diameter





6m or as request

Zinc coating



Plain ends, cutting, threading, etc

Surface treatment

Galvanized,or black


1)In bundle with steel strip, with seaworthy package at the end. Or as the clients’

requirements.2)In bulk

The application

Construction,machine structure pipe, Agriculture equipment pipe,

Water and gas pipe, Greenhouse pipe, Scaffolding pipe, Building material tube,

Furniture tube, Low pressure fluid tube, Oil pipe, etc

Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:+86-371-55023661
  • EMAIL: info@steelguang.com
  • ADDRESS:Room 2001, Unit 2, Building 2, No. 96, Ruhe Road, Zhengzhou City, Henan Province, China
If you wish to cooperate with us, please leave your E-mail and we will contact you then.