Welcome To Henan Steel Guang International Trade Co., Ltd.
HENAN STEEL GUANG INTERNATIONAL TRADE CO., LTD.
API SPEC 2H-2007
Similar products
  • ASTM A36

    ASTM A36/A36M Standard Specification for Carbon Structural SteelASTM A36 / A36M standard specification covers carbon structural steel shapes, plates, and bars of structural quality for use in riveted...

  • ASTM A299 / ASME SA299

    ASTM A299/A299M specification for Pressure Vessel plates, carbon steel, manganese-silicon.The steel shall be killed and shall conform to the fine austenitic grain size requirement. Tension test shall ...

API SPEC 2H-2007

API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures, in selected critical portions which must resist impact, plastic fatigue loading, and lamellar tearing.API Spec 2H main steel grade: API Spec 2H Grade 42, Grade 50 (API 2H GR42, API 2H GR50)and so on.

1.1, the code includes two grades of medium strength steel plates for offshore welded structures, thickness less than or equal to 4in.. Such steel plates must be able to resist impact, plastic fatigue load and lamellar tearing at the key parts specified. These steel plates are used in the process of cold forming and welding in accordance with the API 2B specification. Because the welding process is an important foundation, the welding process used is suitable for the steel and its intended use environment. In turn, steel should also be suitable for manufacturing and welding in shipyards and offshore conditions. The API 2W specification and 2Y specification include similar steel grades with similar mechanical properties, but they have the advantages of low preheating temperature and pre evaluation of toughness with API RP 2Z heat affected zone. The improvement of its performance is to reduce the maximum permissible value of the chemical composition and to change the heat treatment and / or processing technology. 1.2, these steels are mainly used for pipe joints, stiffened panel structures and other connections. In these locations, some panels will be stretched along the thickness direction (Z- direction).

It is required that S4 stipulate the requirement of the thickness direction test of steel plate made by the material manufacturer and the scope of acceptance. It is required that S1 stipulate the requirements of the ultrasonic inspection of the steel plate made by the material manufacturer and the scope of its acceptance. When thickness direction performance is required, but no additional tests are necessary, supplementary requirement S5 provides low sulfur chemical composition, which is intended to reduce the size and quantity of sulfide inclusions in the steel plate. However, it is required that S5 can neither replace the test of S4 thickness direction nor ensure the minimum ductility in the direction of thickness. However, it has been shown that the cross section shrinkage of low sulfur carbon manganese steel is generally at least 20% at the time of Z to tensile test. Even without additional requirements for S5, the API 2H specification also provides a steel with lower sulfur content compared with other commonly used structural steels.

The 1.3 notch toughness in section seventh or S12 in the requirements applicable to the lowest working temperature is 14[degrees Fahrenheit -10] degrees Celsius under water or water temperature and climate environment. The toughness of the cold forming material is lower than the original steel plate due to the strain, especially in the welding area with short pipe and support and over aging treatment. The requirements for the sheet in the seventh section include appropriate adjustment measures for the reduction of toughness resulting from strain and aging.

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm
Width : 1000mm-4000mm
Length : 1000mm-20000mm

MOQ: 1 PC
Product type : Steel plate
Delivery time : Promptly ( Stock) or 10-40 days (Production)
Stock : Available
MTC: Available

Delivery condition: AS REQUIREMENTS






Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:+86-371-55023661
  • EMAIL: info@steelguang.com
  • ADDRESS:Room 2001, Unit 2, Building 2, No. 96, Ruhe Road, Zhengzhou City, Henan Province, China
If you wish to cooperate with us, please leave your E-mail and we will contact you then.
top