Welcome To Henan Steel Guang International Trade Co., Ltd.
HENAN STEEL GUANG INTERNATIONAL TRADE CO., LTD.
Introduction of AISI4140

Introduction of AISI4140

American steel AISI4140 Chemical Composition  Executive Standard  Material Certification

Alloy Constructional Steel: AISI4140

Executive Standard: ASTM A29/A29M-04

Characteristics and Scope of AISI4140 Application:

4140 sheet metal has good machinability, small processing deformation and very good fatigue resistance. It belongs to medium-hardenability steel. After heat treatment, 4104 has good strength, good comprehensive mechanical properties, good technology and high production rate. The maximum operating temperature is 427 degrees Celsius.

4140 sheet metal has high strength, high hardenability, good toughness, small deformation during quenching, high creep strength and lasting strength at high temperature. It is used to produce forge pieces with higher strength than 35CrMo steel and larger tempering section, such as large gear, turbocharger drive gear, rear axle, heavy load connecting rod and spring clip for locomotive traction, and it can also be used for deep drilling rod joints and fishing tools under 2000m.

Chemical Composition of 4140 sheet metal:

Carbon (C) 0.38 ~ 0.43

Manganese (Mn) 0.75 ~ 1.00

Phosphorus (P)≤0.030

Sulfur (S)≤ 0.040

Nickel (Ni)≤0.030

Chromium (Cr) 0.80 ~ 1.10

Molybdenum(Mo) 0.15 ~ 0.25

Mechanical Properties:

Tensile strength σb (MPa): ≥ 1080 (110)

Yield strength σs (MPa): ≥ 930 (95)

Elongation δ5 (%): ≥12

Reduction of Area ψ(%): ≥ 45

Impact Power Akv (J):  ≥ 63

Impact Toughness Index αkv (J/cm2): ≥ 78 (8)

Hardness: ≤ 217HB

Sample Size: the size of sample blank is 25mm

Heat Treatment Specification and Metallographic Organization:

Related News
  • Thickness Of Steel Plate

    Thickness Of Steel Plate

    August 6, 20181.Thin steel plate is the steel plate with a thickness of 0.2-4mm produced by hot or cold rolling method. Thick steel plate is the general designation of steel plate with a thickness of more than 4mm....view
  • Characteristics of Pressure Vessel Standards

    Characteristics of Pressure Vessel Standards

    August 30, 2018Characteristics of Pressure Vessel Standards1.Various typesDue to the unshaped and multi-variety characteristics of pressure vessel products, the standards involved are incomparable to any product. Ac...view
  • Standard And Safety Of Steel Pipes And Steel Materials For Boilers

    Standard And Safety Of Steel Pipes And Steel Materials For Boilers

    August 30, 2018The steel pipe standard has played a role in technology guidance to a certain extent, guiding the capital flow direction and market orientation of the steel pipe manufacturing industry, and making its...view
  • Low-alloy High-strength Steel Introduction

    Low-alloy High-strength Steel Introduction

    April 14, 2018Low-alloy high-strength steel is a kind of engineering structural steel shaped by adding a small amount of Mn, Si and trace amounts of alloy elements such as Nb, V, Ti and Al to carbon structural stee...view
  • TEL:+86-371-55023661
  • EMAIL: info@steelguang.com
  • ADDRESS:Room 2001, Unit 2, Building 2, No. 96, Ruhe Road, Zhengzhou City, Henan Province, China
If you wish to cooperate with us, please leave your E-mail and we will contact you then.
top